• 75mm x 53mm x 63mm h
  • custom anodized tooling
  • 37mm to 33mm center bore
  • multiple keyway
  • blind tapped holes
  • 65mm dia, 40mm h
  • 316 stainless
  • turned and milled
  • hexagonal mounting base (perimeter)
  • 4.5mm threaded through hole (underside)
  • 1.2mm recessed pin holes (underside)
  • precision turned multiple diameter
  • 70mm h x 45mm dia
  • internal, external threading
  • off-center threaded holes
  • center, hollow boss w/keyway
  • 53mm dia x 75mm dia base, 77mm h
  • precision turned & milled tool steel
  • off-center pockets & smooth radius keyways
  • gun drilled precision center bore
  • cross drilled intersecting passage (3D Profiled)
  • 97mm square base
  • 84mm square mount surface
  • 55mm dia threaded pillar taper
    to 40mm internal thread
  • 66mm high, milled and turned
  • routed pockets, cavities
  • blind tapped holes
  • 168mm x 70mm
  • milled, minimum radius edges
  • precision elliptical geometry
  • deep pockets
  • counter sink tapped mounting holes
  • 105mm x 32mm, 52mm h
  • milled, beveled mild steel
  • electroless nickel plating
  • milled pocket, bevel edge
  • angled off-center counterbore through holes
  • tapped blind holes
  • 95mm h x 25mm dia
  • .156 dia gun-drilled hole AND .0160 thru-hole
  • keyed dia
  • 3mm threaded post
  • 100mm x 90mm
  • Aluminum / Gold Alodine
  • minimum radiused & bevel corners
  • multiple precision tapped mounting holes
  • blind hole tapped mounting bosses
  • 90mm x 95mm, 38mm h
  • black anodized aluminum milled and turned
  • 54mm DIA tapered boss, internal thread,
    multiple keyways
  • precision Camera Lens Mounting
  • M2x0.4 blind tapped holes
  • 3mm stainless inserts
  • .6mm, 1.2mm pin guide holes
  • 100mm x 90mm
  • milled as two-parts
  • elliptical inside boss
  • biased, peripheral hexagonal bore
  • deep groove heat sink feature
  • counter bore tapped mounting through holes
  • 200mm h x 80mm dia
  • uniform cylinder dia to .001
  • countersink holes
  • bevel rims
  • electroless nickel plating
  • 220mm outer DIA, 145mm inner DIA, 25mm h
  • custom anodized tooling
  • 6mm inner "Keenserts"
  • nylon fitting, brass inserts installed
  • 3D Profiling
  • counterbored mounting holes
  • 45mm x 35mm x 35mm h
  • black delrin
  • counterbored center boss
  • Orthogonal base w/ side hemispherical vents
  • minimum radius boss to base
  • counter sink tapped through holes
  • 48mm outer DIA, 38mm inner DIA, 10mm h
  • turned, knurled, beveled
  • 44mm inner thread
  • hard anodized aluminum w/ masking
  • 100mm x 38mm
  • 3D profile milled with ball end mill
  • 10mm inner thread w/deep bore
  • Drilled mounting boss
  • 41mm x 48mm x 40mm h
  • aluminum angled heat sink
  • slotted fins w/ slotting cutter
  • multiple irregular angles 3D milling
  • precision tapped blind holes
  • 158mm x 48mm
  • 3D profiled milled w/ ball end mill
  • elliptical (non-circular) smooth radiused bore
  • precision mounting pins
  • custom designed fixture
  • material 416 stainless steel
  • 50mm x 23.5mm x 21mm
  • aluminum multi-angle bracket
  • minimum radius edges
  • uniform wall thickness
  • 82mm x 26mm
  • precision milled, recessed part
  • .3mm o-ring grooves
  • M2x0.4 threaded through holes
  • precision 1mm dia w/ bevel
  • 15mm dia x 22mm h
  • precision turned tool steel
  • conic section hexagonal base
  • threaded post
  • 53mm x 42mm
  • anodized aluminum
  • counter bore holes
  • precision 1.8mm threaded holes
  • thin wall mounting guide (underside)
  • 46mm x 12mm x 6mm h
  • precision milled chromate conversion
    coated aluminum
  • flush serrated thin section radiator
  • counter bore mounting hole
  • bore w/ slotted feature
  • 9mm x 4mm
  • anodized aluminum bracket
  • precision bore
  • precision tapered recess
  • 25mm dia x 27.5mm h
  • threaded through hole aluminum bobbin
  • tapered precision turning
  • hard anodized w/teflon aluminum
  • 53mm x 27mm
  • precision turned dome
  • tapered pockets & features (underside)
  • blind threaded center hole
  • compound angled perimeter holes
  • slide1
  • slide2
  • slide2
  • slide3
  • slide3
  • slide4
  • slide5
  • slide5
  • slide6
  • slide7
  • slide8
  • slide8
  • slide9
  • slide10
  • slide11
  • slide12
  • slide13
  • slide14
  • slide15
  • slide16
  • slide17
  • slide18
  • slide19
  • slide20
  • slide21
  • slide22
  • slide23

GMAN Precision CNC Machining Supports the Manufacturing Service Ecosystem (MSE)